Mechanical Television
Mechanical television in history
The mechanical part usually consists of a Nipkow disk, which has a series of holes in a spiral pattern. In the camera, the disk has a light-detecting device, usually a photoelectric cell, behind it. In the reproducer (the display), a modulated light source, usually a neon tube, replaces the light detector. As each hole flies by, it produces a scan line. An AM radio wave or closed circuit carries the scan line to the reproducer.
Block diagram of mechanical scan television system.
Facsimile transmission of still photographs first employed mechanical television principles in the 1800s. For instance, Shelford Bidwell demonstrated such a system in 1881. For decades, earlier systems had pioneered scanning in the transmission of type and line art. Photographic transmission was a greater challenge. The selenium in early photoelectric cells had very low sensitivity. Scanning a photograph at a resolution suitable for newspaper reproduction could take several minutes. With silhouette or duotone still images, instantaneous transmission was possible by 1909.
Baird-like modern televisor image of replica “Stooky Bill” puppet head similar to the one used by J L Baird in his early TV experiments. His images would probably have been of comparable quality.
In the 1920s, the Japanese electrical scientist Yasujiro Niwa invented a simple device for phototelegraphic transmission through cable and later via radio. American inventor Charles Francis Jenkins developed mechanical television systems in the 1920s and early 1930s. In 1923, Jenkins transmitted the first moving silhouette images, and on June 13, 1925 publicly demonstrated synchronized transmission of images and sound.
Mechanical television transmitting a live, moving image in tone gradations (grayscale images) was demonstrated by British inventor John Logie Baird on January 26, 1926, at his laboratory in London. Unlike later electronic systems with several hundred lines of resolution, Baird’s vertically scanned image, using a scanning disk embedded with a double spiral of lenses, had only 30 lines, just enough to reproduce a recognizable human face.
Because only a limited number of holes could be made in the disks, and disks beyond a certain diameter became impractical, image resolution on mechanical television broadcasts was typically very low, ranging from about 30 lines up to 120 or so. A few systems ranging into the 200-line region also went on the air. Two of these were the 180-line system that Compagnie des Compteurs (CDC) installed in Paris in 1935, and the 180-line system that Peck Television started in 1935 at station VE9AK in Montreal.
Instead of a Nipkow disk, mechanical television can use several other technologies. Other arrangements often made use of a rotating drum, either with holes or with a series of mirrors on it.
Flying spot scanners
Another scanning method was the “flying spot.” The flying spot developed as a remedy for the low sensitivity that photoelectric cells had at the time. A bright, narrow beam of light would shine through the holes of a Nipkow disk. This light would then illuminate the television subject, standing in a darkened studio.
Whipping back and forth and up and down, the spot of light would complete sixteen or more scans per second. The light would reflect back to not one, but a bank of photoelectric cells. The combined signals of these cells gave a strong picture. Like mechanical television itself, flying spot technology grew out of phototelegraphy (facsimile). This scanning method began in the 1800s.
The BBC television service used the flying spot method until 1935. German television used flying spot methods as late as 1938. This year was by far not the end of flying spot scanner technology. The German inventor Manfred von Ardenne designed a flying spot scanner with a CRT as the light source. In the 1950s, DuMont marketed Vitascan, an entire flying-spot color studio system. Today, graphic scanners still use this scanning method. The flying spot method has two disadvantages:
Actors must perform in near darkness;
Flying spot cameras tend to work unreliably outdoors in daylight.
A note about outdoor telecasts with a flying spot scanner: In 1928, Ray Kell from the United States’ General Electric proved that flying spot scanners could work outdoors. The scanning light source must be brighter than other incident illumination.
Kell was the engineer who ran a 24-line camera that telecast pictures of New York governor Al Smith. Smith was accepting the Democratic nomination for presidency. As Smith stood outside the capital in Albany, Kell managed to send usable pictures to his associate Bedford at station WGY, which was broadcasting Smith’s speech. The rehearsal went well, but then the real event began. The newsreel cameramen switched on their floodlights.
Unfortunately for Kell, his scanner only had a 1 kW lamp inside it. The floodlights threw much more light on Governor Smith. These floods simply overwhelmed Kell’s image. In fact, the floods made the unscanned part of the image as bright as the scanned part. Kell’s photocells couldn’t pick up reflections off Smith from the AC scanning beam. Instead, the photocells only detected the flat, DC light from the floodlamps.
The effect is very similar to extreme overexposure in a still camera: The scene disappears, and the camera records a flat, bright light. Use the camera in favorable conditions, though, and the picture comes out fine. Similarly, Kell proved that outdoors in favorable conditions, his scanner worked fine.
Mechanical television with large pictures
A few mechanical TV systems could produce images several feet wide and of comparable quality to the cathode ray tube (CRT) televisions that were to follow. CRT technology at that time was limited to small, low-brightness screens.
Perhaps the best mechanical televisions of the 1930s used the Scophony system, which could produce images of more than 400 lines and display them on screens at least 912 feet (2.83.7 m) in size (at least a few models of this type were actually produced).
The Scophony system used multiple drums rotating at fairly high speed to create the images. One using a 441-line American standard of the day had a small drum rotating at 39,690 rpm (a second slower drum moved at just a few hundred rpm). Today, DLP mechanical TV technology from Texas Instruments far outstrips the capabilities of the Scophony system.
Aspect ratios for different purposes
Some mechanical equipment scanned lines vertically rather than horizontally, as in modern TVs. An example of this method is the Baird 30-line system. Baird’s British system created a picture in the shape of a very narrow, vertical rectangle.
This shape created a portrait image, instead of the landscape orientation that is common today. The position of a framing mask before the Nipkow disk determines the scan line orientation. Placement of the framing mask at the left or right side of the disk gives vertical scan lines. Placement at the top or bottom of the disk gives horizontal scan lines.
Baird’s earliest television images had very low definition. These images could only show one person clearly. For this reason, a vertical, portrait image made more sense to Baird than a horizontal, landscape image. Baird chose a shape three units wide by seven high. Actually this shape is only about half as wide as a traditional portrait. You can imagine this shape this way: A typical doorway also has the proportions three by seven.
Instead of entertainment television, Baird might have had point-to-point communication in mind. Another television system followed that reasoning. The 1927 system developed by Herbert E. Ives at AT&T’s Bell Laboratories was a large-screen television system and the most advanced television of its day. The Ives 50-line system also produced a vertical “portrait” picture. Since AT&T intended to use television for telephony, the vertical shape was logical: phone calls are usually conversations between just two people. A picturephone system would depict one person on each side of the line.
Meanwhile, in the US, Germany and elsewhere, other inventors planned to use television for entertainment purposes. These inventors began with square or landscape pictures. (For example, consider the television systems of these men: Ernst Alexanderson, Frank Conrad, Charles Francis Jenkins, William Peck and Ulises Armand Sanabria.) These inventors realized that television is about relationships between people. From the very beginning, these inventors allowed picture space for two-shots. Soon, images increased to 60 lines or more. The camera could easily photograph several people at once. Then even Baird switched his picture mask to a horizontal image. Baird’s “zone television” is an early example of rethinking his extremely narrow screen format. For entertainment and most other purposes, even today, landscape remains the more practical shape.
Rise of electronic television
The advancement of all-electronic television (including image dissectors and other camera tubes and cathode ray tubes for the reproducer) marked the beginning of the end for mechanical systems as the dominant form of television. Mechanical TV usually only produced small images. It was the main type of TV until the 1930s.
All-electronic television, first demonstrated publicly by Philo Farnsworth in 1934, and first used for broadcasting in 1936, was quickly advancing past this point, reaching 400 to more than 600 lines with fast field scan rates in the next few decades. The last mechanical television broadcasts ended in 1939 at stations run by a handful of public universities in the United States. In 1939, RCA paid Farnsworth $1 million for his patents after ten years of litigation, and RCA began demonstrating all-electronic television at the 1939 World’s Fair in New York City.
Color mechanical television
Modern colour televisor. A test card can just be seen through the lens on the right.
Mechanical television returned to the United States as a method of painting colors over a monochrome CRT. The CBS color television system of Peter Goldmark used such technology in 1940. John Baird’s 1928 color television experiments had inspired Goldmark’s more advanced field-sequential color system. In Goldmark’s system, stations transmit color saturation values electronically. Yet mechanical methods also come into play. At the transmitting camera, a mechanical disc filters hues (colors) from reflected studio lighting. At the receiver, a synchronized disc paints the same hues over the CRT. As the viewer watches pictures through the color disc, the pictures appear in full color.
Of course, simultaneous color systems superseded the CBS-Goldmark system. Yet mechanical color methods continued to find uses. Early color sets were very expensive, over $1,000 in the money of the time. Inexpensive adapters allowed owners of black-and-white, NTSC television sets to receive color telecasts. The most prominent of these adapters is Col-R-Tel, a 1955 NTSC to field-sequential converter. This system operates at NTSC scanning rates, but uses a disc like the obsolete CBS system had. The disc converts the black-and-white set to a field-sequential set. Meanwhile, Col-R-Tel electronics recover NTSC color signals and sequence them for disc reproduction. The electronics also synchronize the disc to the NTSC system. In Col-R-Tel, the electronics provide the saturation values (chroma). These electronics cause chroma values to superimpose over brightness (luminance)changes of the picture. The disc paints the hues (color) over the picture.
A few years after Col-R-Tel, Apollo moon missions also adopted field-sequential techniques. The lunar color cameras all had color wheels. These Westinghouse and later RCA cameras sent field-sequential color television pictures to earth. The earth receiving stations included mechanical equipment that converted these pictures to standard television formats.
Today, some DLP projectors still use color filter wheels.
Recording
In the days of commercial mechanical television transmissions, a system of recording images (but not sound) was developed, using a modified gramophone recorder. Marketed as “Phonovision”, this system, which was never fully perfected, proved to be complicated to use as well as quite expensive, yet managed to preserve a number of early broadcast images that would normally have been lost. Scottish computer engineer Donald F. McLean has painstakingly reconstructed the analogue playback technology required to view these recordings, and has given lectures and presentations on his collection of mechanical television recordings made between 1925 and 1933.
Among the discs in Dr. McLean’s collection are a number of test recordings made by television pioneer John Logie Baird himself. One disc, dated “28th March 1928″ and marked with the title “Miss Pounsford”, shows several minutes of a woman’s face in what appears to be very animated conversation. In 1993, the woman was identified by relatives as Mabel Pounsford, and her brief appearance on the disc is one of the earliest known video recordings of a human being.
Recent uses of mechanical television
Since the 1970s, some amateur radio enthusiasts have experimented with mechanical systems. The early light source of a neon lamp has now been replaced with super-bright LEDs. There is some interest in creating these systems for narrow-bandwidth television, which would allow a small moving image to fit into a channel less than 40 kHz wide (modern TV systems usually have a channel about 6 MHz wide, 150 times larger). Also associated with this is slow-scan TV, although that typically uses electronic systems.
The re-emergence of mechanical TV techniques
Today, a mechanical system of a sort has seen moderate popularity. DLP (Digital Light Processing) projectors use an array of tiny (16 m) electrostatically-actuated mirrors selectively reflecting a light source to create an image. Many low-end DLP systems also use a color wheel to provide a sequential color image, a common feature of many early color television systems before the shadow mask CRT provided a practical method for producing a simultaneous color image.
Another place where high-quality imagery is produced by opto-mechanics is the laser printer, where a small rotating mirror is used to deflect a modulated laser beam in one axis while the motion of the photoconductor provides the motion in the other axis. A modification of such a system using high power lasers is used in laser video projectors, with resolutions as high as 1024 lines and each line containing >1500 points. Such systems produce, arguably, the best quality video images. They are used, for instance, in planetariums.
The closest modern systems to the original mechanical scan camera is the long wave infrared cameras used in military applications such as giving fighter pilots night vision. These cameras use a high sensitivity infrared photo receptor (usually cooled to increase sensitivity), but instead of disks of lenses, these systems use rotating prisms to provide a 525 or 625 line standard video output. The optical parts are made from germanium as glass is opaque at the wavelengths involved. These cameras have found a new role in sporting events where they are able to show (for example) where a ball has struck a bat.
Laser lighting display techniques are combined with computer emulation in the LaserMAME[dead link] project. It is a vector-based system, unlike the raster displays thus-far described. Laser light reflected off of computer-controlled mirrors is used to trace out images generated by classic arcade software which is executed by a specially modified version of the MAME emulation software.
References
^ “VE9AK entry at”. Earlytelevision.org. http://www.earlytelevision.org/ve9ak.html. Retrieved 2010-03-02.
^ Media quotations.
^ “Ulises Armand Sanabria at Early Television website”. Earlytelevision.org. http://www.earlytelevision.org/u_a_sanabria.html. Retrieved 2010-03-02.
^ CBS Field Sequential Color System.
^ The Smith, Kline & French Medical Color TV Unit.
^ Hawes Mechanical Television Archive, How Col-R-Tel Works.
^ The World’s Earliest Television Recordings.
^ Phonovision: The Recovered Images.
External links
Technical information on mechanical television systems
Mechanical Television & Illusion Generators
Hawes Mechanical Television Archive
Early Television Foundation and Museum
List of Mechanical Television Stations in the US and Canada 1928-1939
Scophony System
The World’s Earliest Television Recordings – Restored!
Field-sequential, color television on moon missions
LaserMAME – Mechanically-scanned, giant versions of vector-based arcade games[dead link]
v d e
Broadcast video formats
Television
Analog
525 lines
System M NTSC NTSC-J PAL-M
625 lines
PAL PAL-N/NC PALplus SECAM
Audio
BTSC (MTS) NICAM-728 Zweiton (A2 / IGR) EIAJ SAP
Hidden signals
Captioning Teletext CGMS-A GCR PDC VBI VEIL VITC WSS XDS EPG
Defunct systems
Pre-1940 Baird-Nipkow 180 lines 405 lines 441 lines 819 lines MAC MUSE
Digital
Interlaced
SDTV (480i 576i) HDTV (1080i)
Progressive
LDTV (240p 288p 1seg) EDTV (480p 576p) HDTV (720p 1080p)
MPEG-2 standards
ATSC DVB ISDB DMB-T/H
MPEG-4 AVC standards
ATSC 2.0 (A/72) DMB DMB-T/H DVB SBTVD 1seg
Audio
AC-3 (5.1) DTS MPEG-1 Audio Layer II MPEG Multichannel PCM LPCM AAC HE-AAC
Hidden signals
Captioning Teletext CPCM Broadcast flag AFD EPG
Digital cinema
Super Hi-Vision (2540p 4320p) DCI
Technical issues
14:9 compromise Moving image formats MPEG transport Reverse Standards Conversion Standards conversion Video processing Video on demand HDTV blur
Categories: Television technology | History of television | VideotelephonyHidden categories: All articles with dead external links | Articles with dead external links from September 2009
About the Author
I am an expert from Cheap On Sales, usually analyzes all kind of industries situation, such as air grease pump , pneumatic hand pump.
RC ADVENTURES – INSIDE THE RCSPARKS STUDIO – BEHIND THE SCENES
|
|
ALZO Digital Full Spectrum Light Bulb – ALZO 45W Photo CFL 5500K 91 CRI, Daylight balanced, pure white light, 2800 Lumens, Case of 4 $35.10 Case of 4 full spectrum light bulbs for daylight balanced lighting, energy star compliant, long-lasting at cir. 10,000 hours with 2800 Lumens output; low energy consumption, good for treating S.A.D. (Seasonal Affective Disorder), photo studio lights, or starting plant growth. These are Compact Fluorescent Light (CFL) bulbs. Fits all medium-base E27/E26 sockets, but this is a large bulb that might … |
|
|
Blue Microphones The Pop Universal Pop Filter $24.60 The Blue The Pop Universal Pop Filter is a universal windscreen for use with any microphone. Simply clamp it to the mic stand and position where desired. The sturdy wire mesh and frame ensure years of durability. So be sure to pick one up today!… |
|
|
Alesis iO DOCK Docking Station $399.00 Create, Produce, and Perform with Your iPad! Make music on your iPad with virtually any pro audio gear or instruments thanks to the Alesis iO Dock for your iPad. Designed for musicians, recording engineers, and music producers to gain the connectivity needed to create and perform with iPad. The iO Dock from Alesis allows connection from your Pro Audio Gear to virtually any app in the App Store. Al… |
|
|
Tascam DR2D Portable Digital Recorder $449.99 The Tascam DR-2d Portable Digital Recorder brings high-resolution recording to a compact, affordable package. It offers up to 96kHz/24-bit WAV or MP3 recording to SD cards, and recordings can be transferred to computer through high-speed USB 2.0. A new dual recording feature records a copy of your audio at a lower level, so if the level suddenly jumps you have a backup instead of a distorted perfo… |
|
|
Fisher-Price Bubble Mower $14.76 What do kids love about this Bubble Mower? The bubbles, of course! Now they can have twice the fun with double the bubble action and cool new realistic styling. It’s more fun than ever to pretend to mow the lawn because the Bubble Mower can keep the bubbles blowing for a whole mile of mowing fun. It’s all-new bubble dispensing system features a bigger dispenser for less fill-ups, and a one-press n… |
|
|
Neewer 110CM 43 5-in-1 Collapsible Multi-Disc Light Reflector $9.25 This 5 in 1 collapsible reflector disc Comes with translucent, silver, gold, white, and black five most popular surfaces. Packs into a zip packet. Folds into 12″ carry pouch for easy to carry, durable and flexible steel spring frame insures easy spreading and closing. This reflector fits any standard reflector holders…. |
|
|
On Stage Stands 7701B Tripod Boom Microphone Stand $15.00 The On Stage 7701B Microphone Stand is a durable tripod mic stand and boom combination and just about the best value we’ve ever offered. These stands use the highest quality components. The legs fold down for the most compact storage. Setup height is adjustable from 36 to 63 inches. On Stage 7701B Tripod Microphone Boom Stand… |
|
|
Audio-Technica ATH-M50 Professional Studio Monitor Headphones $157.95 Designed especially for professional monitoring and mixing, the Audio Technica ATHM50 Studio Monitor Headphones feature an efficient collapsible design for space-saving portability and storage. Circumaural ear pieces swivel 180 degrees for easy one-ear monitoring and luxuriously padded ear cushions create an outstanding seal for maximum isolation. The adjustable headband is generously padded for … |
|
|
Behringer ECM8000 Condenser Ultra-Linear Measurement Condenser Microphone $54.99 To get the best sound in any room, you must first understand the room’s acoustics. The ECM8000 is a specialized condenser microphone designed for use with real-time analyzers, such as our ULTRACURVE DEQ2496, to provide an accurate acoustic picture of the room. You can then use your graphic EQ to fine-tune your system’s performance to perfectly match the characteristics of any acoustic environment…. |
|
|
Business and Legal Forms for Photographers (with CD-ROM) (Business & Legal Forms for Photographers) $29.95 Here’s the classic “bible” of forms and checklists for every situation a professional photographer may face. Thoroughly expanded and updated to cover the Internet, this brand-new Third Edition contains 28 forms, each ready-to-use as is, or easily tailored to fit any situation. Photographers will find contracts for wedding, portrait, and assignment photography; property and model releases, assignme… |
Here Are Some Other Continuous Lighting Related Sites For You to Browse
cinematography: Definition from Answers.com
Studio Photography Equipment? - Yahoo! Answers
Red-light_camera encyclopedia topics | Reference.com
lighting and lighting equipment: Information from Answers.com
Discussing question about flash vs continuous lighting in a studio in ...
Bowens International - Wikipedia the free encyclopedia
PHOTOGRAPHY STUDIO CONTINUOUS LIGHTING ... - Twitter
Cook Lighting Studio at the Potteries Mesilla NM : Reviews and ...
Creating a New Look for Modern Istanbul - WSJ.com
Cowboy Studio 2275 Watt Digital Video Continuous Lighting Review ...
